Monitored acappella matrix parameters – Grass Valley Acappella v.3.2.4 User Manual
Page 109
Acappella — Instruction Manual
109
SNMP Monitoring
Monitored Acappella Matrix Parameters
The following groups of parameters can be monitored with the Acappella
SNMP Agent software.
Table 6. Acappella Monitored Parameters
Category
Parameter
Description
General Information
Frame Type
Identify the frame type, e.g.: Acappella_Frame
Router Name
Acappella Matrix Name configured from the Web page.
Model No
Model number of Acappella matrix, such as A88SR-DU-LP
Description
example: 16x4x2 Vid-AES
Product Part Number
example: 610-1196-00
Firmware Name
Name of the firmware, such as Medic FW, Reference FW, Video
Matrix FW etc.
Firmware Version
Version of the Firmware, such as 001, 005 etc.
Software Version
Configuration Version
example: V3.0.0d1
Boot Version
example: 1.0.0 - 5272 acap
Location
Location of Acappella matrix. This can be configured from
SNMP Manager, as well as Web page. This is stored as persis-
tent data, so is retained across reboots.
Asset Tag
Asset tag of Acappella matrix. This can be configured from
SNMP Manager, as well as Web page. This is stored as persis-
tent data, so is retained across reboots.
Network Information
IP Address
Subnet Mask
Gateway Address
Product Configuration
Config Version
Version number of Acappella configuration.
Number of Sources
Number of Destinations
Number of Levels
Number of Channels
Number of Controllers
Physical Matrices
Control Point Information
Control Point IP Address
IP Address of the Control point that is configured in Acappella
Matrix
Control Point Status
Status of the Control point, such as Active/Faulty/Missing.
Control Point Type
Type of the control point such as Controller or NP Client.
Reference Signal Information
Reference Name
Name of the reference signal currently connected to Acappella
Matrix, such as Video Reference #1 etc.,
Reference Status
Status of the reference signal, such as Present/Faulty/Missing
Frame Fan Information
Fan Name
Name of the Fan such as Fan #1, Fan #2
Fan Status
Running or Missing
Power Supply Information
Power Supply Name
Name of the power supply, such as PS#1, PS#2
Power Supply Status
Running or Missing