Grass Valley Acappella v.3.2.4 - Manual (Page 27)

Acappella — Instruction Manual 27
Hardware Description
Hardware Description
Front Panels
The front of the Acappella frame and the related remote panels will vary
with the configuration of the system. All Acappella frames can be ordered
with a local panel installed in the frame. When a local panel is ordered, the
front will appear with the button configuration that matches the Acappella
frame’s Input and Output configuration. Remote panels can be ordered in
several configurations and do not have to match the Acappella frame’s
Input and Output configuration. The panel’s appearance is related to how
many Sources and Destinations are available, not how many Levels are
used.
Any Acappella frame ordered without a Local Panel will appear as shown
in
Figure 1 .
Figure 1. Acappella Front with no Local Panel
All panel fronts (except frames with no Local Panel) will have four Level
buttons, a green Enable button, and a red Protect button. The number of
Source and Destination buttons will change depending on the frame’s con-
figuration for local panels and the desired configuration for remote panels.
Figure 2 is a panel with 16 Sources and 16 Destinations.
Figure 2. 16x16 Front
Figure 3 is a panel with 16 Sources and 8 Destinations.
Figure 3. 16x8 Front
8300_00_02r0
8300_00_08r0
8300_00_09r0