Grass Valley Acappella v.3.2.4 - Manual (Page 50)

50 Acappella — Instruction Manual
Section 3 — Panel Operation
Multiple Source Button Action (Local Panel)
Press and release of a Source button while press and hold of the current
Source button causes the following actions:
• Initiates the Chop function between two Sources on a single Destina-
tion,
• If Destination Gang is currently active, Chop will not invoke, and
• Both Source buttons are High Tally during active Chop function.
After Chop function is activated, press of any button will inactivate the
Chop.
Note Chop is not available on a Remote Panel. The Chop will only be on the Local
Panel even in systems that have remote levels. However, if any Source is
selected by any panel in the system it will stop the Chop.
Destination Button
Single Destination Button Action
Single Destination button press and release causes the following actions:
• Activates that Destination,
• Inactivates all other Destinations,
• Active Destination button is High Tally,
• Inactive Destination buttons are Backlight Tally,
• Updates the Source Tally and active Level Tally to reflect the active Des-
tination status,
• Inactive Level Tally remains at Backlight Tally, and
• Destination Gang is cancelled.
Multiple Destination Button Action
Press and release of a Destination button while press and hold of active Des-
tination button will create a Destination Gang condition with the following
actions:
• A second press and release of a secondary Destination button (while the
primary Destination button is still depressed) will drop or add (toggle)
that Destination from the Destination Gang,