Grass Valley Acappella v.3.2.4 - Manual (Page 65)

Acappella — Instruction Manual 65
Web Browser Interface
8. Highlight Acappella Panel bin for Remote Panels. The Remote Panels on
the network will appear in the right pane of the window, see Figure 21 .
Figure 21. Remote Panels
9. Check the box for the Acappella Remote Panel to update in the Client
Name list.
10. Check the Re-Boot when complete checkbox in the lower left corner to have
the panel(s) re-boot when the software update is complete.
11. Click the Load button to begin the update.
12. Once all Panel downloads are complete, use the Refresh button to
update the window and check that the version of software has been
downloaded to each selected device successfully.
13. When finished, select the Close button.
Web Browser Interface
Enter the IP address set for the Acappella matrix frame or Remote panel
into a web browser to access the Acappella configuration pages. If you
don’t know what these IP addresses are, you can use NetConfig to see the
IP Addresses of all the devices on that network.