Grass Valley Acappella v.3.2.4 - Manual (Page 47)

Acappella — Instruction Manual 47
Section
3
Panel Operation
Local Panels and Remote panels expand the functionality of the Acappella
router.
A frame that has 8 Inputs, 4 Outputs, digital video and Dual Stream digital
AES audio, would have three Levels of 8 inputs and 4 Outputs as follows:
• Eight inputs and four outputs of video,
• Eight inputs and four outputs of audio, and
• A second set of eight inputs and four outputs of audio.
The On Indicators will be lit when there is power to the panel. See Figure 1 .
Button illumination will be either Off, Backlit, Low Tally, or High Tally
depending on the button’s status.
Figure 1. 16x8 Local Panel Layout
Enable Button
The Enable button is green and is found on the lower right of the panel. See
Figure 1 .
Enable Button Action
Press and release of an active Enable button causes the following actions:
• Deactivates the panel,
• Inactive Enable button is illuminated at Backlight Tally, and
• The Protect and Source buttons do not operate.
8300_00_52r0
1
1
2
2
3
3
4
4 Lvl 1 Lvl 2 Lvl 3 Lvl 4
5
5
6
6
7
7
8 9 10 11 12 13 14 15 16
8 Enab Prot
Levels
On Indicators
Destinations
Sources
Protect Enable