Configuring lb product b, Verifying the configuration – H3C Technologies H3C SecBlade LB Cards User Manual
Page 64
58
Figure 48 Creating virtual service VS
Configuring LB product B
Assume that the IP addresses of the interfaces on LB product B and the zones to which they belong have
been configured.
1.
Select Load Balance > Public Setting from the navigation tree.
The public parameter configuration page appears.
2.
Select Keep Last-hop Information.
3.
Click Apply.
Figure 49 Saving the last hop information
Verifying the configuration
A period of time after the hosts in the internal network access the Interface, you can display the statistics
on LB product A to verify load balancing configuration.
To view the traffic from Network A to Network B on LB product A:
1.
Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
2.
Click the Statistics tab.