H3C Technologies H3C SecBlade LB Cards - Manual (Page 52)

46
Figure 34 Network diagram
Configuring the LB product
Assume that the IP addresses of the interfaces on the LB product and the zone to which they belong have
been configured. The following describes the configurations of load balancing in detail.
1. Create real service group HTTPGroup:
a. Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
The Real Service Group tab appears.
b. Click Add.
The Add Real Service Group page appears.
c. Enter the real service group name HTTPGroup, and select the algorithm Weighted Round Robin,
heath monitoring method icmp, and troubleshooting method Keep Connection.
d. Click Apply.
Figure 35 Creating a real service group
IP network
LB product
Server A
Server B
Server C
Cluster
VSIP
61.159.4.100
192.168.1.1:8080
192.168.1.2:8080
192.168.1.3:8080