H3C Technologies H3C SecBlade LB Cards - Manual (Page 63)

57
a. Click the Real Service tab.
b. Click Add.
The Add Real Service page appears.
c. Enter the real service name FirewallA and IP address 10.0.1.1, and select the real service
group FirewallGroup.
d. Click Apply.
Figure 47 Creating a real service
3. Create real service FirewallB for Firewall B:
a. Click Add on the Real Service tab.
The Add Real Service page appears.
b. Enter the real service name FirewallB and IP address 10.0.1.2, and select the real service
group FirewallGroup.
c. Click Apply.
4. Create virtual service VS on LB product A:
a. Click Virtual Service.
b. Click Add.
The Add Virtual Service page appears.
c. Enter the virtual service name VS, and select the Four option for the LB Layer.
d. Click Add next to Virtual Service IP, enter the IP address of the virtual service 20.0.0.1, and
click Apply.
e. Select the mask 24 (255.255.255.0) and protocol type Any.
f. Enter the port number 0, and select the forwarding mode Firewall Forwarding.
g. Select the real service group FirewallGroup, and select the Enable Virtual Service option.
h. Click Apply.