H3C Technologies H3C SecBlade LB Cards - Manual (Page 56)

50
Figure 39 Network diagram
Configuring the LB product
Assume that the IP addresses of the interfaces on the LB product and the zone to which they belong have
been configured and the corresponding zone is enabled with the virtual fragment reassembly function.
The following describes the configurations of load balancing in detail.
1. Create real service group SongsGroup:
a. Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
The Real Service Group tab appears.
b. Click Add.
The Add Real Service Group page appears.
c. Enter the real service group name SongsGroup, select the algorithm Round Robin, health
monitoring method icmp, and troubleshooting method Keep Connection, and enter character
/songs.
d. Click Apply.