H3C Technologies H3C S7500E Series Switches - Manual (Page 72)

61
Field Description
Brd Status/Status
Running status of the card:
• Master—The card is an active SRPU.
• Slave—The card is a standby SRPU.
• Absent—No card is in the slot.
• Fault—The card is booting or the card has failed.
• Normal—The card is an LPU that is correctly operating.
Subslot Num The maximum number of sub-cards supported by the card.
Sft Ver/ Software Ver Software version of the card.
Patch Ver Patch version of the card. If this field is NONE, no patch is installed on the card.
PCB 1 Ver Version of PCB 1 on the card.
FPGA Ver FPGA version of the card.
BootRom Ver Boot ROM version of the card.
CPLD 1 Ver Version of CPLD 1 on the card.
Chip Chip number of the card.
Learning Mode
MAC learning mode of the card:
• Independent VLAN learning (IVL)
• Shared VLAN learning (SVL)
Displaying electronic label data
• Use the display device manuinfo command to display the electronic label data for a card.
display device manuinfo
Slot 0:
DEVICE_NAME : LSQM1SRP2XB0
DEVICE_SERIAL_NUMBER : 210231A73JB098000078
MAC_ADDRESS : 0023-895F-958B
MANUFACTURING_DATE : 2009-8-24
VENDOR_NAME : H3C
Slot 1:
DEVICE_NAME : LSQM1SRP2XB0
DEVICE_SERIAL_NUMBER : 210231A73JB098000070
MAC_ADDRESS : 0023-895F-954F
MANUFACTURING_DATE : 2009-8-24
VENDOR_NAME : H3C
Slot 2:
DEVICE_NAME : LSQM1GV48SA0
DEVICE_SERIAL_NUMBER : 210231A76HB095000082
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2009-10-15
VENDOR_NAME : H3C
Slot 3:
DEVICE_NAME : LSQM1NAT24SC0
DEVICE_SERIAL_NUMBER : 210231A0EAX103000002