H3C Technologies H3C S7500E Series Switches - Manual (Page 60)

49
6. On the Settings tab, set the emulation to VT100 and click OK.
Figure 44 Setting the emulation terminal in Switch Properties dialog box
Powering on the switch
Before powering on the switch, confirm the following:
• The switch has been steadily mounted.
• All the cards have been correctly installed.
• All the communication cables, fibers, power cables, and grounding cables have been correctly
connected.
• The voltage of power supply can meet the requirements of the switch.
• The console cable has been correctly connected. The configuration terminal has been started, and
the terminal parameters have been configured.
To power on the switch:
Turn on the power supply of the switch to power on the switch.
The following is a sample output you can see on the terminal:
Starting......
RAMLine.....OK
System is booting................
************************************************************************
* *
* BOOTROM, Version 3.01 *