H3C Technologies H3C S7500E Series Switches - Manual (Page 140)

129
NOTE:
The ALM LED will be on for a period of time when the system starts up.
SRPU active/standby status LED (ACTIVE)
The SRPUs provide the active/standby status LED (ACTIVE) to indicate the status (active or standby) of the
SRPUs.
Table 59 SRPU active/standby status LED description
LED LED status Description
ACTIVE
On The SRPU is active.
Off
This status occurs in the following cases:
• The SRPU is in standby status.
• The SRPU is faulty. Examine the card LED to confirm the problem.
CF card status LED (CFS)
The SRPUs provide a CF card status LED (CFS) to indicate the status of the CF card.
Table 60 CF card status LED description
LED LED status Description
CFS
On The CF card is in position.
Off The CF card is not in position or is damaged.
RJ-45 Ethernet interface status LED
The SRPUs provide RJ-45 Ethernet interface status LEDs to indicate the link status and data
receiving/forwarding status of the corresponding Ethernet interfaces.
Table 61 RJ-45 Ethernet interface status LED description
LED LED status Description
RJ-45 Ethernet interface
status LED
Flashing The Ethernet interface is receiving or sending data.
On A link is present.
Off No link is present.
Combo port status LED
A combo port comprises an SFP interface and an RJ-45 Ethernet interface. Only one interface of a
combo port can work at a time. The SRPUs provide a combo port status LED to indicate the link status and
data receiving/forwarding status of the corresponding combo port.
Table 62 Combo port status LED description
LED LED status Description
Combo port status LED
Flashing The combo port is receiving or sending data.
On A link is present.
Off No link is present.