H3C Technologies H3C S7500E Series Switches - Manual (Page 126)

115
CF card ordering guide
If an S7500E switch is installed with an SRPU with a CF card interface, you can order and install a CF
card as required to expand the storage space of the switch. For the SRPUs with CF card interfaces,
see Table 40 .
Table 40 CF card specifications
CF card model Description Storage capacity
CF-256M-I Storage medium-CompactFlash car-256MB 256 MB
CF-512M Storage medium-CompactFlash car-512MB 512 MB
CF-1G Storage medium-CG-1G 1 GB
Transceiver modules
Transceiver module overview
The switch supports the following transceiver modules:
• CFP modules listed in Table 41
• QSFP+ modules listed in Table 42
• QSFP+ cables listed in Table 43
• QSFP+ to SFP+ cables listed in Table 44
• 10-Gigabit XFP modules listed in Table 45
• 10-Gigabit SFP+ modules listed in Table 46
• 10-Gigabit SFP+ cables listed in Table 47
• Gigabit SFP modules listed in Table 48
• 100-Mbps SFP modules listed in Table 49
• EPON modules listed in Table 50
Table 41 CFP module specifications
CFP module
Central
wavelength Connector Cable
specifications
Maximum
transmission
distance
LSUM1CFP0 1310 nm LC 9/125 μm single-mode fiber 10 km (6.21 miles)
Table 42 QSFP+ module specifications
QSFP+
module
Central
wavelength
Connector
Cable
specifications
Mode
bandwidth
Maximum
transmission
distance
LSUM1QSF
P0
850 nm MPO
50/125 μm
multi-mode OM3
fiber
2000 MHz*km 100 m (328.08 ft)