Sfp interface status led, Sfp+ interface status led, Xfp interface status leds – H3C Technologies H3C S7500E Series Switches User Manual
Page 141

130
NOTE:
•
For the SFP interface and the RJ-45 Ethernet interface of a combo port, only one interface can be active
at a time. The other one is inactive. By default, the interface with smaller number becomes active.
•
To use the inactive interface of a combo port, execute the undo shutdown command to activate the
interface. The other interface of the combo port is then automatically shut down and becomes inactive.
SFP interface status LED
The SRPUs provide an SFP interface status LED to indicate the link status and data receiving/forwarding
status of the corresponding SFP interface.
Table 63 SFP interface status LED description
LED LED
status
Description
SFP interface status LED
Flashing
The SFP interface is receiving or sending data.
On
A link is present.
Off
No link is present.
SFP+ interface status LED
The SRPUs provide an SFP+ interface status LED to indicate the link status and data receiving/forwarding
status of the corresponding SFP+ interface.
Table 64 SFP+ interface status LED description
LED status
Description
Flashing
The SFP+ interface is receiving or sending data.
On
A link is present.
Off
No link is present.
XFP interface status LEDs
The SRPUs provide XFP interface status LEDs to indicate the link status and data receiving/forwarding
status of the corresponding XFP interface.
Table 65 XFP interface status LED description
LEDs
Description
LINK ACT
On
Flashing
A link is present, and the XFP interface is receiving or sending data.
On
Off
A link is present, but no data is being received or sent.
Off
Off
No link is present.