Triggering a complete distribution, Configuring static routes for fc, Configuration restrictions and guidelines – H3C Technologies H3C S12500-X Series Switches User Manual
Page 97: Configuration procedure, Configuring fspf, Required.)
88
Step Command
Remarks
2.
Enter VSAN view.
vsan vsan-id
N/A
3.
Configure zone
distribution and merge
types as complete
distribution and complete
merge.
zoneset distribute full
The default setting is incomplete
distribution and incomplete merge.
Activating a zone set and distributing it to the entire
fabric
You can activate a zone set as the active zone set on a switch, distribute the active zone set to the entire
fabric, and implement access control through the active zone set. The modifications to the active zone set
do not take effect until reactivation.
The zone set to be activated must have been created and must consist of at least one N_Port member.
Only one active zone set can exist in a VSAN.
When distributing the active zone set to the entire fabric, the device determines whether to carry zone
database information according to the distribution type specified by the zoneset distribute full
command.
To activate a zone set and distribute it to the entire fabric:
Step Command
1.
Enter system view.
system-view
2.
Enter VSAN view.
vsan vsan-id
3.
Activate the specified zone set as the active zone
set and distribute it to the entire fabric.
zoneset activate name zoneset-name
NOTE:
Active zone set information will not contain the alias names of zone members. If a zone in the active zone
set has members with a zone alias, the non-overlapping N_Port members in the zone alias are directly
added to the zone. You can view the zone member change by using the display zoneset active command.
Triggering a complete distribution
Use the zoneset distribute command to trigger a complete distribution, which distributes both the active
zone set and zone database.
After activating a zone set as the active zone set by using the zoneset activate command, you can modify
the database configuration. With the zoneset distribute command, you can distribute the active zone set
and the modified database to the entire fabric without changing the active zone set.
To activate a complete distribution: