H3C Technologies H3C S12500-X Series Switches - Manual (Page 101)

92
# Configure Switch A to operate in FCF mode, and enter the view of VSAN 1.
system-view
[SwitchA] fcoe-mode fcf
[SwitchA] vsan 1
# Create zone alias Alias 1 and add pWWN 22:33:44:55:66:77:88:99 (Disk B) and FC address
020004 (Disk C) as its members.
[SwitchA-vsan1] zone-alias name Alias1
[SwitchA-vsan1-zone-alias-Alias1] member pwwn 22:33:44:55:66:77:88:99
[SwitchA-vsan1-zone-alias-Alias1] member fcid 020004
[SwitchA-vsan1-zone-alias-Alias1] quit
# Create Zone 1 and specify FC ID 010001 as its member.
[SwitchA-vsan1] zone name Zone1
[SwitchA-vsan1-zone-Zone1] member fcid 010001
[SwitchA-vsan1-zone-Zone1] quit
# Create Zone 2 and specify FC ID 010002 and pWWN 11:22:33:44:55:66:77:88, whose zone
aliases are Alias 1, as its members.
[SwitchA-vsan1] zone name Zone2
[SwitchA-vsan1-zone-Zone2] member fcid 010002
[SwitchA-vsan1-zone-Zone2] member pwwn 11:22:33:44:55:66:77:88
[SwitchA-vsan1-zone-Zone2] member zone-alias Alias1
[SwitchA-vsan1-zone-Zone2] quit
# Create Zone 3 and specify FC ID 010003, whose zone alias is Alias 1, as its member.
[SwitchA-vsan1] zone name Zone3
[SwitchA-vsan1-zone-Zone3] member fcid 010003
[SwitchA-vsan1-zone-Zone3] member zone-alias Alias1
[SwitchA-vsan1-zone-Zone3] quit
# Create zone set Zoneset 1 and add Zones 1, 2, and 3 as its members.
[SwitchA-vsan1] zoneset name Zoneset1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone2
[SwitchA-vsan1-zoneset-Zoneset1] member Zone3
[SwitchA-vsan1-zoneset-Zoneset1] quit
# Configure zone distribution and merge types as complete distribution and complete merge.
[SwitchA-vsan1] zoneset distribute full
# Activate a zone set as the active zone set, and distribute it to the entire fabric.
[SwitchA-vsan1] zoneset activate name Zoneset1
Verifying the configuration
All verification tasks are performed on Switch B.
# Display zone set information for VSAN 1.
display zoneset vsan 1
VSAN 1:
zoneset name Zoneset1
zone name Zone1