H3C Technologies H3C S12500-X Series Switches User Manual
Fcoe configuration guide
This manual is related to the following products:
Table of contents
Document Outline
- Title Page
- Preface
- Contents
- FCoE overview
- Configuring an FCoE mode
- Configuring VFC interfaces and FIP
- VFC interfaces and FIP configuration task list
- Configuring a VFC interface
- Enabling FCoE for a VLAN and mapping a VSAN to the VLAN
- Configuring the FC-MAP value
- Configuring the FKA advertisement period value
- Configuring the FCF priority
- Displaying and maintaining VFC interfaces and FIP
- VFC interfaces and FIP configuration example
- Configuring FIP snooping
- Setting up a fabric
- Overview
- Fabric setup configuration task list
- Enabling or disabling the fabric configuration function
- Setting a fabric name
- Setting the switch priority
- Configuring the allowed domain ID list
- Configuring a domain ID for a switch
- Configuring the mapping between the N_Port WWN and an FC address
- Configuring the fabric timers
- Configuring the fabric reconfiguration
- Configuring a VFC interface to reject incoming RCF requests
- Configuring RSCN aggregation
- Configuring and obtaining FC4 information of nodes
- Displaying and maintaining a fabric
- Static fabric building configuration example
- Dynamic fabric building configuration example
- Configuring VSAN
- Configuring FC routing and forwarding
- Overview
- Configuring static routes for FC
- Configuring FSPF
- FSPF configuration task list
- Enabling FSPF
- Configuring the shortest SPF calculation interval
- Configuring the minimum LSR receiving interval
- Configuring the minimum LSR refresh interval
- Configuring the FSPF cost for an interface
- Configuring the hello interval for an interface
- Configuring the dead interval for an interface
- Configuring the LSR retransmission interval for interfaces
- Disabling FSPF for an interface
- Configuring FSPF GR
- Displaying and maintaining FC routing and forwarding
- Static FC routing configuration example
- FSPF configuration example
- Configuring FC zones
- Overview
- FC zone configuration task list
- Configuring zone aliases
- Configuring zones
- Configuring zone sets
- Configuring the default zone policy
- Configuring zone distribution and merge types
- Activating a zone set and distributing it to the entire fabric
- Triggering a complete distribution
- Renaming zone aliases, zones, and zone sets
- Copying zone aliases, zones, and zone sets
- Deleting the zone database
- Displaying and maintaining FC zones
- FC zone configuration example
- Configuring NPV
- Configuring FC ping
- Configuring FC tracert
- Appendixes