beautypg.com

Protocols and standards – H3C Technologies H3C S12500-X Series Switches User Manual

Page 22

background image

13

To convert among the three FCoE modes, first convert the switch to non-FCoE mode. After converting the

switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode are cleared.
To configure an FCoE mode for a switch:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Configure an FCoE mode
for the switch.

fcoe-mode { fcf | npv |
transit }

By default, a switch operates in non-FCoE
mode.

3.

Display the FCoE mode of
the switch.

display fcoe-mode

This command can be executed in any
view.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: