H3C Technologies H3C S12500-X Series Switches - Manual (Page 357)

346
Step Command Remarks
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable the RIPng process on
the interface.
ripng process-id enable
By default, RIPng is disabled on an
interface.
Configuring OSPFv3 between an MCE and a PE
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
N/A
3. Set the router ID. router-id router-id N/A
4. Redistribute VPN routes.
import-route protocol [ process-id
| all-processes | allow-ibgp ] [ cost
cost | route-policy
route-policy-name | type type ] *
By default, no routes are
redistributed into OSPFv3.
5. (Optional.) Configure filtering
of advertised routes.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
By default, redistributed routes are
not filtered.
6. Return to system view. quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable the OSPFv3 process
on the interface.
ospfv3 process-id area area-id
[ instance instance-id ] By default, OSPFv3 is disabled on
an interface.
Configuring IPv6 IS-IS between an MCE and a PE
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an IS-IS process for an
IPv6 VPN instance and enter
IS-IS view.
isis [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Configure a network entity
title.
network-entity net By default, no NET is configured.
4. Enable IPv6 for the IS-IS
process.
ipv6 enable By default, IPv6 is disabled.
5. (Optional.) Redistribute VPN
routes.
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ] [ cost
cost | [ level-1 | level-1-2 |
level-2 ] | route-policy
route-policy-name | tag tag ] *
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route level
in the command, the command
redistributes routes to the level-2
routing table.