Vpls configuration examples, Static pw configuration example, Network requirements – H3C Technologies H3C S12500-X Series Switches User Manual
Page 304
293
Task Command
Display MAC address table information for
one or all VSIs.
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ]
[ count ]
Display L2VPN PW information.
display l2vpn pw [ vsi vsi-name ] [ protocol { bgp | ldp |
static } ] [ verbose ]
Display PW class information.
display l2vpn pw-class [ class-name ]
Display Ethernet service instance information.
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
Display VSI information.
display l2vpn vsi [ name vsi-name ] [ verbose ]
Display information about automatically
discovered VPLS PEs.
display l2vpn auto-discovery [ peer ip-address ] [ vsi
vsi-name ]
Display VPLS label block information from
BGP.
display l2vpn bgp [ peer ip-address | local ] [ vsi vsi-name ]
[ verbose ]
Display BGP L2VPN peer group information.
display bgp group l2vpn [ group-name ]
Display VPLS PE information maintained by
BGP.
display bgp l2vpn auto-discovery [ peer ip-address
{ advertised | received } [ statistics ] | route-distinguisher
route-distinguisher [ pe-address ip-address [ advertise-info ] ]
| statistics ]
Display VPLS label block information
maintained by BGP.
display bgp l2vpn signaling [ peer ip-address { advertised |
received } [ statistics ] | route-distinguisher route-distinguisher
[ site-id site-id [ label-offset label-offset [ advertise-info ] ] ] |
statistics ]
Display BGP L2VPN peer information.
display bgp peer l2vpn [ group-name log-info | ip-address
{ log-info | verbose } | verbose ]
Display BGP L2VPN update group
information.
display bgp update-group l2vpn [ ip-address ]
Clear MAC address entries for one or all VSIs. reset l2vpn mac-address [ vsi vsi-name ]
Reset L2VPN BGP sessions.
reset bgp { as-number | ip-address | all | external | group
group-name | internal } l2vpn
VPLS configuration examples
Static PW configuration example
Network requirements
Configure VPLS on each PE, and establish static PWs between the PEs to interconnect the CEs.