H3C Technologies H3C S12500-X Series Switches User Manual

Page 243

232

Configure PE 2:
# Enable IS-IS on PE 2.

system-view

[PE2] isis 1

[PE2-isis-1] network-entity 10.444.444.444.444.00

[PE2-isis-1] quit

# Configure an LSR ID, and enable MPLS and LDP.

[PE2] mpls lsr-id 5.5.5.9

[PE2] mpls ldp

[PE2-ldp] quit

# Configure interface VLAN-interface 11, and enable IS-IS, MPLS, and LDP on the interface.

[PE2] interface vlan-interface 11

[PE2-Vlan-interface11] ip address 9.1.1.2 255.0.0.0

[PE2-Vlan-interface11] isis enable 1

[PE2-Vlan-interface11] mpls enable

[PE2-Vlan-interface11] mpls ldp enable

[PE2-Vlan-interface11] quit

# Configure interface Loopback 0, and enable IS-IS on it.

[PE2] interface loopback 0

[PE2-LoopBack0] ip address 5.5.5.9 32

[PE2-LoopBack0] isis enable 1

[PE2-LoopBack0] quit

# Create VPN instance vpn1, and configure the RD and route target attributes for it.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 11:11

[PE2-vpn-instance-vpn1] vpn-target 3:3 import-extcommunity

[PE2-vpn-instance-vpn1] vpn-target 3:3 export-extcommunity

[PE2-vpn-instance-vpn1] quit

# Configure VLAN-interface 12, and bind the interface to VPN instance vpn1.

[PE2] interface vlan-interface 12

[PE2-Vlan-interface12] ip binding vpn-instance vpn1

[PE2-Vlan-interface12] ipv6 address 2002::1 64

[PE2-Vlan-interface12] quit

# Enable BGP on PE 2.

[PE2] bgp 600

# Configure the capability to advertise labeled routes to IBGP peer 4.4.4.9 and to receive labeled
routes from the peer.

[PE2-bgp] peer 4.4.4.9 as-number 600

[PE2-bgp] peer 4.4.4.9 connect-interface loopback 0

[PE2-bgp] address-family ipv4 unicast

[PE2-bgp-ipv4] peer 4.4.4.9 enable

[PE2-bgp-ipv4] peer 4.4.4.9 label-route-capability

[PE2-bgp-ipv4] quit

# Configure the maximum hop count from PE 2 to EBGP peer 2.2.2.9 as 10.

[PE2-bgp] peer 2.2.2.9 as-number 100

[PE2-bgp] peer 2.2.2.9 connect-interface loopback 0

This manual is related to the following products: