beautypg.com

H3C Technologies H3C S12500-X Series Switches User Manual

Page 235

background image

224

After the configurations, each PE and the ASBR-PE in the same AS can establish an LDP neighbor

relationship. Execute the display mpls ldp peer command on the switches. The output shows that
the session status is Operational.

3.

Configure a VPN instance on the PEs:
For the same VPN, the route targets for the VPN instance on the PE must match those for the VPN
instance of the ASBR-PE in the same AS. This is not required for PEs in different ASs.
# Configure CE 1.

system-view

[CE1] interface vlan-interface 12

[CE1-Vlan-interface12] ipv6 address 2001:1::1 96

[CE1-Vlan-interface12] quit

# Configure PE 1.

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 100:1

[PE1-vpn-instance-vpn1] vpn-target 100:1 both

[PE1-vpn-instance-vpn1] quit

[PE1] interface vlan-interface 12

[PE1-Vlan-interface12] ip binding vpn-instance vpn1

[PE1-Vlan-interface12] ipv6 address 2001:1::2 96

[PE1-Vlan-interface12] quit

# Configure CE 2.

system-view

[CE2] interface vlan-interface 12

[CE2-Vlan-interface12] ipv6 address 2001:2::1 96

[CE2-Vlan-interface12] quit

# Configure PE 2.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance] route-distinguisher 200:2

[PE2-vpn-instance] vpn-target 200:1 both

[PE2-vpn-instance] quit

[PE2] interface vlan-interface 12

[PE2-Vlan-interface12] ip binding vpn-instance vpn1

[PE2-Vlan-interface12] ipv6 address 2001:2::2 96

[PE2-Vlan-interface12] quit

# Configure ASBR-PE 1, creating a VPN instance and binding the VPN instance to the interface

connected to ASBR-PE 2 (ASBR-PE 1 considers ASBR-PE 2 its attached CE).

[ASBR-PE1] ip vpn-instance vpn1

[ASBR-PE1-vpn-instance-vpn1] route-distinguisher 100:1

[ASBR-PE1-vpn-instance-vpn1] vpn-target 100:1 both

[ASBR-PE1-vpn-instance-vpn1] quit

[ASBR-PE1] interface vlan-interface 12

[ASBR-PE1-Vlan-interface12] ip binding vpn-instance vpn1

[ASBR-PE1-Vlan-interface12] ipv6 address 2002:1::1 96

[ASBR-PE1-Vlan-interface12] quit

# Configure ASBR-PE 2, creating a VPN instance and binding the VPN instance to the interface

connected to ASBR-PE 1 (ASBR-PE 2 considers ASBR-PE 1 its attached CE).

[ASBR-PE2] ip vpn-instance vpn1