Verifying the configuration, Ipv6 mpls l3vpn configuration examples, Configuring ipv6 mpls l3vpns – H3C Technologies H3C S12500-X Series Switches User Manual
Page 281
270
[CE2-Vlan-interface10] ip address 100.1.1.2 24
[CE2-Vlan-interface10] quit
Verifying the configuration
# Display L2VPN PW information on PE 1. The output shows that two LDP PWs have been established.
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 1 up, 1 blocked, 0 down, 0 defect
Xconnect-group Name: vpna
Peer PW ID In/Out Label Proto Flag Link ID State
2.2.2.2 20 65662/65660 LDP M 1 Up
3.3.3.3 30 65659/65655 LDP B 1 Blocked
# Display detailed information about the primary and backup PWs on PE 1.
Xconnect-group Name: vpna
Connection: ldp
Peer: 2.2.2.2 PW ID: 20
Signaling Protocol : LDP
Link ID : 1 PW State : Up
In Label : 65662 Out Label: 65660
In Label : 1151 Out Label: 1279
Wait to Restore Time: 0 sec
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000760000005
Tunnel NHLFE IDs : 133
Peer: 3.3.3.3 PW ID: 30
Signaling Protocol : LDP
Link ID : 1 PW State : Blocked
In Label : 65659 Out Label: 65655
In Label : 1150 Out Label: 1279
MTU : 1500
PW Attributes : Backup
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000860000006
Tunnel NHLFE IDs : 135
# Display L2VPN PW information on PE 2. The output shows that an LDP PW has been established.
[PE2] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpna
Peer PW ID In/Out Label Proto Flag Link ID State