H3C Technologies H3C S12500-X Series Switches - Manual (Page 224)

213
Step Command Remarks
6. Enable the PE to exchange
labeled routes with the
ASBR-PE in the same AS.
peer { group-name | ip-address }
label-route-capability
By default, the PE does not
advertise labeled routes to any
IPv4 peer/peer group.
7. Return to BGP view. quit N/A
8. Configure the PE of another
AS as the EBGP peer. peer { group-name | ip-address }
as-number as-number
N/A
9. Enter BGP-VPNv6 address
family view.
address-family vpnv6 N/A
10. Enable the PE to exchange
BGP VPNv6 routing
information with the EBGP
peer.
peer ip-address enable
By default, the PE does not
exchange labeled routes with any
IPv4 peer/peer group.
Configuring the ASBR-PEs
In the inter-AS IPv6 VPN option C solution, an inter-AS LSP is needed, and the routes advertised between
the PEs and ASBRs must carry MPLS label information. The configuration is the same as that in the
Inter-AS IPv4 VPN option C solution. For more information, see "Configuring MPLS L3VPN."
Configuring the routing policy
A routing policy on an ASBR-PE does the following:
• Assigns MPLS labels to routes received from the PEs in the same AS before advertising them to the
peer ASBR-PE.
• Assigns new MPLS labels to the labeled routes to be advertised to the PEs in the same AS.
The configuration is the same as that in the Inter-AS IPv4 VPN option C solution. For more information,
see "Configuring MPLS L3VPN."
Displaying and maintaining IPv6 MPLS L3VPN
You can soft-reset or reset BGP sessions to apply new BGP configurations. A soft reset operation updates
BGP routing information without tearing down BGP connections. A reset operation updates BGP routing
information by tearing down, and then reestablishing BGP connections. Soft reset requires that BGP
peers have route refresh capability.
Use the following commands to soft reset or reset BGP sessions:
Task Command Remarks
Soft reset BGP sessions for VPNv6
address family.
refresh bgp { ip-address | all | external |
group group-name | internal } { export |
import } vpnv6
Available in user view.
Reset BGP sessions for VPNv6
address family.
reset bgp { as-number | ip-address | all |
external | internal | group group-name }
vpnv6
Available in user view.
Use the following commands to display IPv6 MPLS L3VPN: