Eneo PNR-5108 - Manual (Page 99)

Network Video Recorder
91
Editing Device Information
Select Edit Device from the device menu.
Information
It allows you to change information for connection to
the device.
 Name: Edit the device name. You can use the same
name for more than one device. By selecting the
Disable Device option, the iNEX program no longer
considers the device registered in the NVR system.
Selecting Device Name Sync automatically updates
the name based on the settings in the device
(supported only for devices which use the iNEX
protocol).
 Address Type: Select device’s address type.
− Auto Scan (LAN): Allows you to enter the device’s
mDNS number when you edit the device’s address.
− IP Address: Allows you to enter the device’s IP address when you edit the device’s address.
− DVRNS: If the device uses the DVRNS (DVR Name Service) function, this allows you to enter the device
name which is registered on the DVRNS server when you edit the device’s address. The name should
match the one set during the DVRNS setup in the device.
− Domain Name: If the device uses the domain name service, this allows you to enter the device’s domain
name registered on a DNS server when you edit the device’s address.
 Address: Edit the device’s address based on the selected address type above.
 Port: Edit the port numbers. The port numbers you enter should match the port numbers set in the device
for remote connection (Admin), remote monitoring (Watch), recording (Record) and two-way audio
communication (Audio).
 ID, Password: Edit the user ID and password for connection to the device.
 Connection Test: Click the button to test the connection to the device with the information entered above.
 Stream Protocol: Select the protocol for streaming (supported only for devices which use the ONVIF TM
Conformance protocol).
 Record Protocol: Select the protocol for recording (supported only for devices which use the ONVIF
TM
Conformance protocol).
 ONVIF
TM
Profiles: Select a preset ONVIF TM
profile (supported only for devices which use the ONVIF
TM
Conformance protocol). Refer to 12.3 Remote Setup of ONVIF
TM
Conformance Protocol Devices,
Profiles (p. 102) for details.