Chapter 15, Event management, 1 setting up event management schedule – Eneo PNR-5108 User Manual
Page 116: O chapter 15 — event management, O chapter 15, Chapter 15 — event management
Operating Instructions
108
Chapter 15
— Event Management
You can manage event detection notification to the Client system based on a preset event management
schedule and monitor or play back the event-detected video on the Client system. Event related functions
may not be supported depending on the protocol that the device uses (supported for the iNEX protocol
and some versions of the ONVIF
TM
Conformance and Axis protocol).
15.1 Setting up Event Management Schedule
First, check the following and run the Setup program.
The NVR system should be running.
Devices should be added to a device group. Refer to Chapter 12 — Device Management (p. 89) for
details.
Go to the Start Menu → Click iNEX → Run the iNEX Setup program → Select the Event Management
menu, and set up the event management schedule following the procedures below.
Click the Schedule Setup button at the bottom. The Schedule Setup window appears, and schedule
windows are displayed with the current settings for each Preset.