Eneo PNR-5108 - Manual (Page 25)

Network Video Recorder
17
Selecting the registered device group, and then the button at the bottom of the Site List panel displays
the Edit Device Group window and allows you to edit the selected device group. Refer to Chapter 12
— Device Management (p. 89) for details.
3.3 Live Video Monitoring
Go to the Start Menu → Click iNEX → Run the iNEX Client program and enter login information.
1. Check that the devices were added to a device group in the Site list.
2. Click the Live tab on the tab panel → Select a site to connect
to from the Site list, and drag and drop it on the Live screen.
Live video from the selected site is displayed on the screen.
Refer to Chapter 5 — Live Video Monitoring (p. 45) for
details.
3.4 Recording
Run the Setup program. Refer to 3.1 Connecting (p. 11) for details about running the Setup program.
Check that the devices were added to a device group in the Device menu.