Eneo PNR-5108 - Manual (Page 121)

Network Video Recorder
113
− Select PTZ Camera: Select cameras to
move. This is supported for PTZ cameras
only.
− Selected PTZ Camera: Displays the
selected cameras and allows you to select a
Preset position for the camera to move.
Refer to 5.3 Controlling Cameras, PTZ
Control, PTZ Preset Control (p. 56) about
setting up Preset positions.
− Alarm Out: Select to activate alarm out when an event is detected based on the event condition setting
(supported only for devices which use the iNEX protocol).
− Duration: Enter the duration for the alarm out to
last.
− Select Alarm Out Devices: Select alarm out
devices to activate.
4. Select the users to be notified the events after double clicking the Target schedule window.
Managing Schedule
Adding a New Schedule
 Adding a new schedule with a different time range: Clicking the button in the upper left corner
of the Time Coverage schedule window allows you to add a new schedule with a different time coverage.