Eneo PNR-5108 - Manual (Page 50)

Operating Instructions
42
Chapter 5
— Live Video Monitoring
You can monitor live video of each group. The NVR system displays video from devices based on the
settings in the device on the Live screen.
First, check the following and run the Client program.
 The NVR system should be running.
 Devices should be added to a device group. Refer to Chapter 12 — Device Management (p. 89) for
details.
5.1 Monitoring Video
Live video monitoring is supported in the Live panel (maximum 4). If the Live tab is not on the tab panel,
go to the System menu, click New Tab, and then Live.
Click the Live tab on the tab panel → Select a camera, device
or device group from the Site list, and drag and drop it on the
Live screen. Live video from each camera is displayed on the
screen. You can move a camera screen to the desired location
on the Live screen without disconnecting the current connection
while monitoring video. Select a camera screen and drag and
drop it on the desired location.
NOTE: The Client system performance might seriously deteriorate when simultaneously monitoring or playing
back video with 1280x720 or higher resolution on more than one camera screen.
Panel Toolbar
The panel toolbar at the bottom allows you to control the Live panel.
 (Save to User Layout): Saves the current screen format.

(Screen Format): Changes the screen format. Clicking the button
displays more available screen formats. Clicking the or button moves to the previous or next camera
groups.