Eneo PNR-5108 - Manual (Page 140)

Operating Instructions
132
System Setup
Run the Setup program and set up the federation server.
Click the
(System Setup) button to display the system setup screen.
 Server Address, Server Port: Enter the IP
address (domain name) and port number of the
DVRNS server that the NVR system to register
is registered.
 Use SSL: Allows you to enhance the security of
data transferred between services of the iNEX
program by using the SSL (Secure Sockets Layer)
protocol. Using the SSL function might cause
congestion in the federation server depending on
the security level. Log in the iNEX program again
after you change the setting. When the setting is
changed, all services that are currently connected
to the federation server reconnect, and the iNEX
Setup and iNEX Client programs are logged out.