Eneo PNR-5108 - Manual (Page 14)

Operating Instructions
6
4. When the following screen appears, click Next.
5. Designate the folder path to install the Client program.
Clicking the Disk Cost… button shows the available and
required disk space for each hard disk drive for the installation.
Then click Next.
6. When the following screens appear, click Next.
NOTE: The following screen appears when using Microsoft
®
Windows
®
Vista or later operating systems. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan devices using ONVIF
TM
protocol
when scanning devices for device registration.