Eneo PNR-5108 - Manual (Page 71)

Network Video Recorder
63
5. You can check the recording status in the Device menu. Click All Devices in the Site panel and all
registered devices are displayed in the Site List panel. Click the arrow button ( ) beside the device
name, and check the status (Record: During Time-Lapse recording or Event-Based recording, Instant
Recording: During Instant recording, Idle: Ready to record, Not Use: Camera disabled, Video Loss:
On video loss). The Time-Lapse Recording or Event-Based Recording OSD (
) is displayed in the
upper right corner of the camera screen of the Live screen in the Client program.
Managing Schedule
Adding a New Schedule
 Adding a new schedule with a different time range: Clicking the button in the upper left corner
of the Time Coverage schedule window allows you to add a new schedule with a different time range.
 Adding a new schedule with the same time range: Clicking the button in the upper left corner
of the Condition schedule window allows you to add a new schedule with the same time range.