ARM Electronics XR&HD480 OSD - Manual (Page 75)

User’s Manual
74
Detail
Set this item to and the detailed information of the NAS device will be
shown on the monitor. Refer to the following for an example. The information
is “read only”.
NAS Detailed Info
Device Name: xxxxxxxxxxx
IP: 192.168.50.2
Port: 8080
Netmask: 255.255.255.0
Storage Status
Index Status Free Size Total Size
< Data Protection >
Enter this menu to select the data users wish to protect from data purging or overwriting.
The menu will be displayed as below.
Data Protection
Date Time
2010/12/06 PM 01:29:08
2010/12/06 PM 01:42:41
2010/12/07 AM 09:36:02 Event
Yes
Yes
Yes
Lock
NO
NO
NO
The first column shows the date/time information. The second column shows whether if the
data contains event videos. From the third column, users can change the option to
to protect the selected data. When the data is no more important, users can change the
option back to .
< Repair On Power Loss >
This item enables the DVR to do auto HDD scan after powered on, if the DVR previously
experienced unexpected power loss or was not shutdown properly. If auto scan failed,
formatting of HDD is required. The preset is . This helps to secure the data saved in
the HDD. Therefore, it is suggested to keep this function enabled.
NOTE:
If password protection is enabled, login with authorized account will be
prompted before HDD format. Regarding details of HDD scan, please refer to the
User’s Manual for more information.