ARM Electronics XR&HD480 OSD - Manual (Page 24)

User’s Manual
23
NOTE:
Users may select either mode for the wireless network.
However, all devices communicating directly with each other
must operate under the same mode.
- Choose A Wireless Network
This function enables the unit to scan for available wireless network
connections in surrounding area and list them as shown below.
Choose A Wireless Network
Mode
Infrastructure
Infrastructure ESSID
Wireless-ap
zeroneoffice ENCRYPT
OFF
OFF
The list shows operating mode, network name (ESSID) and the
encrypt status of each wireless network. “Mode” indicates the
operating mode; “ESSID” indicates the name of the wireless network
found; and “Encrypt” indicates whether the transferring data has been
encrypted.
Move the cursor to the desired wireless network and press ENTER to
select it. Once users select a wireless network, some related items,
such as , and ,
are already set for users.
NOTE: A Wireless USB Adapter must be connected to the DVR
before choosing a wireless network under this submenu.
- Network Name (ESSID)
This item is used for setting the name of a wireless network. The set
name will be shared by every member of the wireless network. Note
that the Network Name should be one word without space.