Dial-out setup – ARM Electronics XR&HD480 OSD User Manual

Page 31

User’s Manual

- Dial-out Setup

The Dial-out function enables user to establish dial-up modem
communication to and from the Premium H.264 DVR for remote
notification. Users can connect one modem to a Premium H.264 DVR.
For more information on dial-up setting on PC, see Appendix B:

Dial-up Connections via Modem

NOTE:

The Dial-out Service is not available if there is no

modem connected to the unit.

In Network Setup menu, select and press ENTER to
enter the Dial-out menu. The menu displays as follows.

Dial-out Setup

Dial-out DHCP
Dial-out IP
Dial-out Netmask
Dial-out Gateway
Dial-out DNS
Phone Number
Dial-out Account
Dial-out Password
Dial-out Idle Time
Dial-out Max Time
Connect

OFF

192.168.254.1

255.255.255.0

192.168.254.254
192.168.254.254

1234

user
user

0 Min

Dial-out DHCP

This item allows users to obtain a dynamic IP address from DHCP
(Dynamic Host Configuration Protocol) server over modem connection.
If the item is enabled (ON), a dynamic IP will be assigned to the

Premium H.264 DVR

. In this case, users do not need to configure a

static IP and the following settings will be read only.

Select to enable the DHCP function, or to set the
dial-out IP address, Netmask, Gateway and DNS manually.

Dial-out IP

The item is for setting a static IP address that identifies the Premium

H.264 DVR

over modem connection. Set the to

for accessing this item.

Move the cursor over and press ENTER, and then press
UP / DOWN keys to change the values in the selected field.