ARM Electronics XR&HD480 OSD - Manual (Page 15)

User’s Manual
14
„ Time Zone
Select <Time Zone> to enter the time zone setting. To find out users’ local
time zone, please visit
wwp.greenwichmeantime.com or refer to the following
picture for information.
NOTE:
The <Time Zone> must be set to users’ local time zone or the
<Network Time Protocol Setup> will not be accessible.
„ Date / Time Display
Users are allowed to set the date / time OSD displays in 1 or 2 rows. Use the
UP / DOWN keys to change the setting.
„ Date Display Mode
This function allows user to set the OSD display type of the date. There are
three options to select from: , or . “Y” represents
“Year”, “M” represents “Month” and “D” represents “Day”. Use UP / DOWN
keys to change the setting.
„ Time Display Mode
User can set the time format to <12HR> or <24HR>. Use the UP / DOWN
keys to change the format.