ARM Electronics XR&HD480 OSD - Manual (Page 14)

User’s Manual
13
„ Software Upgrade Via Internet
The item is used to upgrade the unit’s software via the internet. Select one of
the listed software versions and choose . The Premium H.264 DVR
downloads the software, updates the system files, and reboots automatically.
„ FPGA Upgrade Via Local Device
The item is used to upgrade the unit’s firmware via a local device. Choose the
firmware for upgrade and select . The Premium H.264 DVR loads the
firmware, updates the system files, and reboots automatically.
< Language >
The Language item allows user to select the language for the OSD setup menu and screen
messages. Language selection takes effect immediately when the selection is done. Press
UP / DOWN to select from listed languages and press ENTER to confirm.
< Date / Time >
Users can set the current date, time and other OSD parameters in this menu. In System
Setup menu, select and press ENTER; the Date/Time menu displays as
follows.
Date/Time
Date
Time
Time Zone
Date/Time Display
Date Display Mode
Time Display Mode
Daylight Saving Time Setup
Network Time Protocol Setup 2010/12/21
PM 10:39:26
OFF
1 Row
Y/M/D
12 HR
NOTE:
The reset of date / time settings only applies to new videos. The date and
time of previously recorded video will not be changed.
NOTE: To avoid record database corruption, clearing the database is recommended
after changing Date / Time setting.
„ Date / Time
Select or and press ENTER for adjusting the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.