ARM Electronics XR&HD480 OSD - Manual (Page 20)

User’s Manual
19
„ LAN Setup
The network related settings in the LAN Setup menu should be associated
with the network service type. If users select for , then
the PPPoE related menu items will not be displayed.
Select in Network Setup menu and press ENTER for setting the
parameters; the menu displays as follows.
LAN Setup
DHCP
IP
Netmask
Gateway
DNS
PPPoE Account
PPPoE Password
PPPoE Max Idle
Connect At Booting
Network Restart OFF
192.168.1.150
255.255.255.0
192.168.1.1
0.0.0.0
35 Min
Yes
No
- DHCP
This item allows user to obtain a dynamic IP address from DHCP
(Dynamic Host Configuration Protocol) server when the unit boots up.
When using DHCP, the settings are dynamic and they will be changed
every time users power up and power off the unit, depending on the
network's setup.
If the item is enabled (ON), a dynamic IP will be assigned to the
Premium H.264 DVR . In this case, user does not need to configure a
static IP and the Ethernet settings, including IP address, Netmask,
Gateway and DNS settings, will be read only.
If users are using permanent addressing, set DHCP to for
setting the IP Address, Netmask, Gateway, and DNS. Check with the
network system administrators or IT personnel for appropriate values
for these settings.