ARM Electronics XR&HD480 OSD - Manual (Page 102)

User’s Manual
101
Playback the videos on the Data List
Click on the toolbar at the top of the main window. The “Data List” window displays,
shown as the figure below:
The “Data List” shows all recorded videos, “Normal” and “Event” separately, that are stored
in the destination folder appeared at the top. Note that users can also click on the
top to select a different folder which contains recorded videos. Select one from the list and
click at the bottom, then the “Playback” window will be shown as below:
In the tab, users can set starting time and displaying cameras of the
selected video. Then click on the upper right-hand corner of the window to start
playback the video with selected starting time and displaying camera on the main window.