Westermo IDW-90 AT - Manual (Page 6)

6 6620-3200
AT-command Description
A/ Repeat last command line
A Accept incoming call
##An Only analogue outgoing call
B B channel protocol
(no function use IDW-90+Configurator command PROT)
%B Set local baudrate
CONF Enter IDW-90+Configurator
&C DCD control
#C Received bearer service
#C1=hbhb Select bearer service outgoing
#C2=hbhbhbhb Select bearer service incoming
!%C
Enable/Disable Data Compression
D Initiate outgoing call
&D DTR control
!+DS Data Compression
E Local echo 1
!%E Enable/Disable Line Quality Monitor and Auto Retrain or Fallback/Fall Forward
!+ES Error Control
&F Load factory defaults ISDN
!&F Load factory defaults analogue option
H Disconnect
#H Display msn
I Display version information
!I Display version information for analogue modem.
&K Flow control
!K MNP Extended Services
!%L Report Line Signal Level
#M Received CLID
!+MS Modulation Selection
N Set line baudrate V.110 (no function use IDW-90+Configurator command BRN)