Westermo IDW-90 AT - Manual (Page 12)

12 6620-3200
!+DS – Data Compression
This extended-format compound parameter controls the V.42bis data compression func-
tion if provided in the modem. It accepts four numeric sub parameters:
AT!+DS=[[,[,[,]]]]
Specifies the desired direction(s) of operation of the data compres-
sion function; from the DTE point of view.
0 Negotiated; no compression (V.42bis P0=0).
3 both directions, accept any direction (V.42bis P0=11) (default)
Specifies whether or not the modem should continue to operate if
the desired result is not obtained.
0 Do not disconnect if V.42bis is not negotiated by the remote
modem as specified in
Specifies the maximum number of dictionary entries (2 048 entries)
which should be negotiated (may be used by the DTE to limit the
codeword size transmitted, based on its knowledge of the nature of
the data to be transmitted).
Specifies the maximum string length (32 bytes) to be negotiated
(V.42bis P2).
Reporting Current or Selected Values
Command: AT!+DS?
Response: +DS: ,,,
Example: +DS: 3,0,2048,32 for the defaults and 2048 entry max dictionary
Reporting Supported Range of Parameter Values
Command: AT!+DS=?
Response: +DS: (range),(range), (dict>range),(range)
Example: +DS: (0,3),(0),(2048),(32)
E – Local echo
Selects the local echo in command mode.
ATE0 No local echo
ATE1 Local echo on in command phase (default)