Welltech LP-803 v.3.07 User Manual
Page 88
LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
88 / 90
2014/07/22
Item Explanation
Hi-Tone Gain
Default: 2261; This column can only enter numbers; maximum length
is 5 bytes with a range of 0~65535.
Lo-Tone Gain
Default: 1130; This column can only enter numbers; maximum length
is 5 bytes with a range of 0~65535.
On Time 1
Default: 30; Set up the first category of ON time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
Off Time 1
Default: 20; Set up the first category of OFF time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
On Time 2
Default: 30; Set up the secondsond category of ON time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
Off Time 2
Default: 400; Set up the secondsond category of OFF time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
On Time 3
Default: 0; Set up the third category of ON time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
Off Time 3
Default: 0; Set up the third category of OFF time.
This column can only enter numbers; maximum length is 3 bytes with
a range of 0~ 999 (10ms).
Submit [Button]
Save the Settings.
2.9.8. Default (Reset to Default)
2.9.8.1. Functions
Default Provides the way of eliminating all Settings and reloading the default Settings except
the data of Phone Book.
2.9.8.2. Instruction
Item Explanation
Reset [Button]
Clear all Setting and reset to default, Then reboot system
automatically.
Export [Button]
[Export] button, Provide device configuration back up. Default file
name is config.db.
Restore [Button]
Provide restore feature, Import file format is .db.
Note: If user use [Update.htm] web page’s [Restore Configuration] to upload [config.db] file, it
can’t clear configuration from this feature.
2.9.8.3.
Operate Instruction
Example 1: Export System Configuration
Step 1: Please finish the Web parameter Set up, Then reboot LP803.
Step 2: In [Reset to Default] web page, Press [Export System Configuration]’s [Export] button