Welltech LP-803 v.3.07 - Manual (Page 53)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
53 / 90 2014/07/22
Item Explanation
message.
Please confirm this function supported by your SIP Register Server or
IP-PBX server.
Submit [Button] Save the Settings.
2.8.1.3. Operate Instruction
Example 1: Register at port other than 5060
Step 1: In [Service Domain Setting] web page, Set up [Realm Active: Enable, Display Name:
22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test,
Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for
MWI: Disable] (See Figure 1).
Since port 5060 is widely used in VoIP SIP port, hacker is easily to detect your device is an
VoIP device (via port 5060) and invade your device to make expensive call. We strongly
suggest not to use port 5060. Use another port to avoid this issue happening. In this
example, We use SIP port 6000 instead. However, your registration SIP Server or IP-PBX
Server should be able to acceport SIP port other than 5060.
(Figure 1)
Step 2: In [Service Domain Setting] web page (See Figure 2), the register status of that account
is [System Status].
(Figure 2)
Example 2: Enalbe Subscribe For MWI
Step 1: In [Service Domain Setting] web page, Setup [Realm Active: Enable, Display Name:
22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test,
Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for
MWI: Enable ] (See Figure 3).