Welltech LP-803 v.3.07 - Manual (Page 36)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
36 / 90 2014/07/22
2.5.6. General (Normal Setting)
2.5.6.1. Functions
General Provide Caller ID, Call Waiting, Auto Answer and etc.
2.5.6.2. Instruction
Figure 1: LP803 Device
(Figure 1)
Item Explanation
Call Waiting Default: Enable.
When Setting up Call Waiting Enable and an incoming call arrives, you
will hear a waiting tone. If you want to answer this waiting call, you
need to press the key [Hold] to hold existing call and answer incoming
call.
Provide options: Disable, Enable.
Ring Timeout Default: 60 seconds.
LP803 Phone will send a stop message to the caller when the Ring
Timeout was expired.
Provide options: 20, 40, 60, 80, 120, 180 and 240.
Auto Anwser Call Default: Disable.
If you Enable this function and when receiving an incoming call, LP803
phone will answer the call automatically and enable Loud Speaker
Phone feature.
Provide options: Disable, No Ring (auto answer), or 1,2,3,4,5 rings.
Auto On-Hook
After Bye Default: 30 (seconds).
LP803 phone will auto On-hook (drop this call) when it received a
bye
message after configured time was expired.
Provide options: 0, 5, 10, 20, 30.
Mute After Auto
Answer
Default: Disable.
If you Enable this function, LP803 phone will activate mute feature
after it answer a call automatically.
Provide options: Disable, Enable.
Maximum Talk
Time Default: 180 seconds. This column can only be numbers; maximum
length is 5 bytes with the range of 0~65000 (seconds). If the
parameter set 0 that is disable talk time limit.
Submit [Button] Save the settings.
2.5.7. Volume
2.5.7.1. Functions
Volume can setup received volume and transmitted gain and ring type of this LP803 IP Phone.