Welltech LP-803 v.3.07 User Manual
Page 42
LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
42 / 90
2014/07/22
Item Explanation
Network (Both
WAN & LAN)
Set up VLAN functions.
VLAN Active
Default: Disable; When Enabling this function, receiving VALN Packets
function will be started.
Provide: Disable, Enable.
VID (802.1Q/ TAG) Default: 136; Provide Virtual LAN ID (VLAN or VID) for VLAN Server.
This column can only be numbers; maximum length is 4 bytes with the
range 3~4094.
User Priority
(802.1P)
Default: 0; This column can only be number; maximum length is 1
bytes with the range 0~7.
SIP & RTP
Setup the VLAN function of SIP & RTP
SIP VID
Default: 0; If you Enable this function, SIP ethereal packages will
contain VLAN ID instead of Enabling VLAN Packets.
This column can only be numbers; maximum length is 4 bytes with the
range 3~4094, and 0 is Disable.
SIP User Priority
(802.1P)
Default: 0.
Provide options: 0~7.
RTP VID
Default: 0; If you Enable this function, RTP ethereal packages will
contain VLAN ID instead of Enabling VLAN Packets.
This column can only enter numbers; maximum length is 4 bytes with
the range 3~4094, and 0 is Disable.
RTP User Priority
(802.1P)
Default: 0.
Provide options: 0~7.
Submit [Button]
Save the Settings.
2.6.4. VPN (PPTP/L2TP Link Type)
2.6.4.1. Functions
VPN Provide functions to Setup PPTP/L2TP.
Note: After you have enabled the VPN functions,
you could login in LP803 to configure via LAN port.
2.6.4.2. Instruction