Welltech LP-803 v.3.07 - Manual (Page 78)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
78 / 90 2014/07/22
(Figure 1)
Step 2: Enter the page of [select file], select the updating file (Example: voip.ssh), press [open]
button and will go back to [Update Firmware], then press [Update] button, (See Figure 2).
(Figure 2)
Step 3: There will show a [Note], it tells you some messages that you should not do them during
the updating firmware. When you are sure of these notes very clear, please press [OK]
button to close the [Note]. Then LP803 will start to update firmware, (see Figure 3).
(Figure 3)
Step 4: There will show a page of [Note Information], it tells you the system is updating and it will
reboot automatically as updating completely (See Figure 4).
(Figure 4)
2.9.5. Advanced (Advanced Settings)
2.9.5.1. Functions
Provide functions to set up Send Anonymous CID, Billing Signal, Send Flash Event, Encryption
and Syslog.
2.9.5.2. Instruction
Figure 1: LP803 Device