Welltech LP-803 v.3.07 - Manual (Page 39)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
39 / 90 2014/07/22
Item Explanation
This column can enter numbers and strings; maximum length is 15
bytes.
PPPoE User This column can enter numbers and strings; maximum length is 32
bytes.
PPPoE Password This column can enter numbers and strings; maximum length is 32
bytes.
PPPoE Service
Name
This column can enter numbers and strings; maximum length is 32
bytes.
*The information of this column is provided by ISP, if you don’t known
what is the data, do not Setup it.
PPPoE AC Name This column can enter numbers and strings; maximum length is 32
bytes.
*The data of this column is provided by ISP, if you don’t known what is
the data, do not setup it.
Submit [Button] Save the settings.
2.6.1.3. Operate Instruction
Example 1: Check Host Name
Step 1: In [WAN Setting] web page, Setup [WAN Active: DHCP, System Name: VOIP_PHONE]
(See Figure 1).
(Figure 1)
Step 2: In [System Status] web page, User can view [WAN] port network status (See Figure 2).
(Figure 2)
Example 2: Check PPPoE Service Name & AC Name
Step 1: In [WAN Setting] web page, Setup [WAN Active: PPPoE, PPPoE User: [email protected],
PPPoE Password: test] (See Figure 3).