Welltech LP-803 v.3.07 - Manual (Page 15)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
15 / 90 2014/07/22
1.6.2.3. Hold Call
In the talking state, press [Hold] key, the phone call will retain immediately. Then, user can
select other line to make a new call.
1.6.2.4. Call Waiting
In the talking state, If user hear a call waiting tones and LP803 LCD show a new incoming call
number at the same time. User can press [Hold] key to retain original call and answer waiting
call. During the talking state, User can press [Hold] key again, the original call will be connected.
1.6.2.5. Blind Transfer
If user 『A』 and 『B』 are in a phone call, 『A』 will transfer this phone to user 『C』:
1. 『A』 press
[Trans] on LP803 device, then 『A』 can hear dial tone.
2. 『A』 enter user 『C』 phone number and press “#” Key (Or wait for 3 seconds).
3. 『A』 can hand up the phone.
1.6.2.6. Attendant Transfer (Answer then Transfer)
If user 『A』 and 『B』 are in a phone call, 『A』 will transfer this phone call and talk to user 『C』:
1. 『A』 press
[Hold] key, then hear dial tone.
2. 『A』 dial 『C』 phone number and press “#” key (Or wait for 3 seconds).
3. The user 『C』 answer the call and after talk was finished. Then 『A』 press
[Trans] key to
complete the transfer feature.
4. If the user 『C』 doesn’t answer, 『A』 can press [Hold] key to return the phone call, then talk
『
B』.
2. Web Page
2.1. Web Login Level Table
Web Page Menu Administrator System Normal
Status Yes Yes Yes