Welltech LP-803 v.3.07 - Manual (Page 52)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
52 / 90 2014/07/22
2.8. SIP Setting (Register Environment)
Provide functions of [Service, Codec, Advanced, STUN].
2.8.1. Service (SIP Register Setting)
2.8.1.1. Functions
Provide 5 SIP register accounts to register 5 different SIP Server or IP-PBX.
2.8.1.2. Instruction
Item Explanation
Realm Default: Realm 1. Provide options: 1~5. Realm is, in other words, SIP
Server or IP-PBX Server. There 5 realm can be the same one.
Realm Active Default: Disable; When you Enable this function, LP803 will start to
register the SIP Register Server or IP-PBX server.
Provide options: Disable, Enable.
Display Name Display name will be shown on LCD of your LP803.
This column can enter numbers and strings (support: 0~9, a~z, @, _,
-, *, #, ., +, :); maximum length is 31 bytes.
Phone Number Setup assigned Phone Number from SIP Register Server or IP-PBX
server.
This column can be numbers and strings (support: 0~9, a~z, @, _, -,
*, #, ., +, :); maximum length is 31 bytes.
Authentication ID Setup the SIP Register ID.
This column can be numbers and strings(support: 0~9, a~z, @, _, -, *,
#, ., +, :); maximum length is 47 bytes.
Authentication
Password Setup SIP Registration Password.
This column can be numbers and strings; maximum length is 31 bytes.
Domain Server Setup Domain Server.
This column can enter IP or Domain Name with the format of
xxx.xxx.xxx.xxx; maximum length is 63 bytes. If the Domain Server
has Port Number, please add it at the end of Domain Name, for
instance: nat.voiptalk.org:5065.
Proxy Server Set up Proxy Server or IP-PBX Server.
This column can enter IP or Domain Name with the format of
xxx.xxx.xxx.xxx; maximum length is 63 bytes. If the Domain Server
has Port Number, please add it at the end of Domain Name, ex:
nat.voiptalk.org:5065.
Subscribe for MWI Default: Disable.
When Enable this function, system will send [Subscribe of MVI]