Welltech LP-803 v.3.07 - Manual (Page 51)

LAN Phone 803
User Manual
Welltech Technology Co., Ltd.
51 / 90 2014/07/22
This column can only enter numbers; maximum length is 5 bytes with
the range of 1~65533.
If you want to Setup fixed Port, you should enter the same number for
the two columns.
If you want to Set up a period of Ports, the left column is Start Port and
the right column is End Port.
Extranet Port Show the address of Extranet Port.
Setup the Extranet Port address of Start and End.
This column can only enter numbers; maximum length is 5 bytes with
the range of 1~65533.
If you want to Setup fixed Port, you should enter the same number for
the two columns.
If you want to Setup a range of Ports, the left column is Start Port and
the right column is End Port.
Server IP Address Setup the Internal Server IP address.
The type is xxx.xxx.xxx.xxx of 15 bytes.
Action Provide [Delete] button to erase the data.
Submit [Button] Save the Settings.
Delete All [Button] Reset all data.
Note: 1. Internet & Extranet Port parameter, Please remember to avoid the local LP803 default
port, Example: 5060, 9999, 20000, other ports can refer to documents.
2.7.3.3. Operate Instruction
Step 1: In [Vitrual Server Setting] web page, Setup [Index: 1, Active :select, Protocol: TCP,
Internet Port: 80~80, Extranet Port: 8080~8080, Server IP Address: 192.168.123.150;
Index: 2, Active:select, Protocol: TCP, Internet Port: 600~600, Extranet Port: 600~600,
Server IP Address: 192.168.123.15] (See Figure 1).
(Figure 1)
Step 2: Use other personal computer to Setup IP 192.168.123.150, Then connect LP803’s LAN
port, Start personal computer Web Server function.
Step 3: Link to [http://192.168.123.150:8080], Show [Web Function Testing] web page.